Enhanced Catalytic Activity in Liquid‐Exfoliated FeOCl Nanosheets as a Fenton‐Like Catalyst

A facile liquid‐phase exfoliation method to prepare few‐layer FeOCl nanosheets in acetonitrile by ultrasonication is reported. The detailed exfoliation mechanism and generated products were investigated by combining first‐principle calculations and experimental approaches. The similar cleavage energies of FeOCl (340 mJ m^?2) and graphite (320 mJ m^?2) confirm the experimental exfoliation feasibility. As a Fenton reagent, FeOCl nanosheets showed outstanding properties in the catalytic degradation of phenol in water at room temperature, under neutral pH conditions, and with sunlight irradiation. Apart from the increased surface area of the nanosheets, the surface state change of the nanosheets also plays a key role in improving the catalytic performance. The changes of charge density, density of states (DOS), and valence state of Fe atoms in the exfoliated FeOCl nanosheets versus plates illustrated that surface atomistic relationships made the few‐layer nanosheets higher activity, indicating the exfoliation process of the FeOCl nanosheets also brought about surface state changes.     

Exploring Regioselective Bond Cleavage and Cross‐Coupling Reactions using a Low‐Valent Nickel Complex

Recently, esters have received much attention as transmetalation partners for cross‐coupling reactions. Herein, we report a systematic study of the reactivity of a series of esters and thioesters with [{(dtbpe)Ni}₂(μ‐η²:η²‐C₆H₆)] (dtbpe=1,2‐bis(di‐tert‐butyl)phosphinoethane), which is a source of (dtbpe)nickel(0). Trifluoromethylthioesters were found to form η²‐carbonyl complexes. In contrast, acetylthioesters underwent rapid C_acyl?S bond cleavage followed by decarbonylation to generate methylnickel complexes. This decarbonylation could be pushed backwards by the addition of CO, allowing for regeneration of the thioester. Most of the thioester complexes were found to undergo stoichiometric cross‐coupling with phenylboronic acid to yield sulfides. While ethyl trifluoroacetate was also found to form an η²‐carbonyl complex, phenyl esters were found to predominantly undergo C_aryl?O bond cleavage to yield arylnickel complexes. These could also undergo transmetalation to yield biaryls. Attempts to render the reactions catalytic were hindered by ligand scrambling to yield nickel bis(acetate) complexes, the formation of which was supported by independent syntheses. Finally, 2‐naphthyl acetate was also found to undergo clean C_aryl?O bond cleavage, and although stoichiometric cross‐coupling with phenylboronic acid proceeded with good yield, catalytic turnover has so far proven elusive.     

Post‐Synthetic Polymerization of UiO‐66‐NH2 Nanoparticles and Polyurethane Oligomer toward Stand‐Alone Membranes for Dye Removal and Separation

Metal–organic frameworks (MOFs) are widely used as porous materials in the fields of adsorption and separation. However, their practical application is largely hindered by limitations to their processability. Herein, new UiO‐66‐Urea‐based flexible membranes with MOF loadings of 50 ( 1 ), 60 ( 2 ), and 70 wt % ( 3 ) were designed and prepared by post‐synthetic polymerization of UiO‐66‐NH₂ nanoparticles and a polyurethane oligomer under mild conditions. The adsorption behavior of membrane 3 towards four hydrophilic dyes, namely, eosin Y (EY), rhodamine B (RB), malachite green (MG), and methylene blue (MB), in aqueous solution was studied in detail. It exhibits strong adsorption of EY and RB but weak adsorption of MG and MB in aqueous solution. Owing to the selective adsorption of these hydrophilic dyes, membrane 3 can remove EY and RB from aqueous solution and completely separate EY/MB, RB/MG, and RB/MB mixtures in aqueous solution. In addition, the membrane is uniformly textured, easily handled, and can be reused for dye adsorption and separation.     

Catalytic Activity of Cationic and Neutral Silver(I)–XPhos Complexes with Nitrogen Ligands or Tolylsulfonate for Mannich and Aza‐Diels–Alder Coupling Reactions

Cationic and neutral silver(I)–L complexes (L=Buchwald‐type biaryl phosphanes) with nitrogen co‐ligands or organosulfonate counter ions have been synthesised and characterised through their structural and spectroscopic properties. At room temperature, both cationic and neutral silver(I)–L complexes are extremely active catalysts in the promotion of the single and double A³ coupling of terminal (di)alkynes, pyrrolidine and formaldehyde. In addition, the aza‐Diels–Alder two‐ and three‐component coupling reactions of Danishefsky’s diene with an imine or amine and aldehyde are efficiently catalysed by these cationic or neutral silver(I)–L complexes. The solvent influences the catalytic performance due to limited complex solubility or solvent decomposition and reactivity. The isolation of new silver(I)–L complexes with reagents as ligands lends support to mechanistic proposals for such catalytic processes. The activity, stability and metal–distal arene interaction of these silver(I)–L catalysts have been compared with those of analogous cationic gold(I) and copper(I) complexes.     

Sorption of methanol,dimethyl carbonate,methyl acetate,and acetone vapors in CTA and PTMSP: General findings from the GAB Analysis

Sorption of vapors of four organic compounds in two glassy polymers, cellulose triacetate (CTA) and poly[(trimethylsilyl)propyne] (PTMSP), has been reported and analyzed in terms of Guggenheim‐Anderson‐De Boer (GAB) model. These two structurally and physicochemically different glassy polymers both independently showed that one sorption site was formed by about three monomeric units. This finding held true for vapors of all characterized compounds; that is, for methanol, for its derivatives dimethyl carbonate and methyl acetate, and for acetone. The “rule of three” might thus also be applicable to other sorbates and glassy polymers. Further, an original modification of the GAB model for the sorption of alcohols in PTMSP was derived and successfully tested. Overall, the analyses of the sorption isotherms, heats of sorption and diffusion coefficients supported the view that the sorption of vapors in glassy polymers has adsorptive nature. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 561–569     

银纳米颗粒对聚合物太阳能电池性能的提高

采用水溶性银纳米颗粒附着在反型太阳能电池的电子传输层上,用以提高有机太阳能电池的短路电流。所制备的器件结构为ITO/ZnO/Ag NPs/P3HT(Poly 3-hexylthiophene):PC_[60]BM/MoO₃/Ag。其金属银纳米颗粒的表面等离激元在410 nm处出现了共振吸收峰,半峰全宽约为60 nm。器件的光电流在可见光范围内均有所增加,短路电流相对于标准器件提高了20.2%,光电转化效率相对提高了17.2%。     

Hyperbranched Kaustamin as an antibacterial for surface treatment

Hyperbranched Kaustamin as a commercially available cationic flocculant adsorbs on a glass surface with formation of the polymer film. Kaustamin has antimicrobial effect on Gram-negative and Gram-positive bacteria, its film on glass keeps integrity and shape after absorption of water from air, which make the polymer appropriate as an antibacterial cover.     

Effect of power-law nonlinearity on ${ \mathcal P }{ \mathcal T }$-symmetric optical system with fourth-order diffraction

Gaussian-type soliton solutions of the nonlinear Schrödinger (NLS) equation with fourth order dispersion, and power law nonlinearity in the novel parity-time (${ \mathcal P }{ \mathcal T }$)-symmetric quartic Gaussian potential are derived analytically and numerically. The exact analytical expressions of the solutions are obtained in the first two-dimensional (1D and 2D) power law NLS equations. By means of the linear stability analysis, the effect of power law nonlinearity on the stability of Gauss type solitons in different nonlinear media is carried out. Numerical investigations do confirm the stability of our soliton solutions in both focusing and defocusing cases, specially around the propagation parameters.     

酰胺功能化修饰琼脂糖/硅胶复合材料的制备及吸附性能研究

采用溶胶-凝胶法,以氧化琼脂糖和四甲氧基硅烷为前驱体,通过水解、缩聚反应制得琼脂糖/硅胶复合材料,进一步利用开环、"巯-烯"点击和酰胺化反应对复合材料实现酰胺基团功能化修饰.借助红外光谱(FT-IR)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)对所制备复合材料进行结构、组成和微观形貌表征.以制备的酰胺功能化修饰琼脂糖/硅胶复合材料为吸附剂,探讨其对莱克多巴胺的吸附过程,实验考察了溶剂、吸附时间、莱克多巴胺的初始浓度等对吸附的影响.结果表明:经过修饰反应酰胺基团成功接枝到琼脂糖/硅胶复合材料,该材料颗粒呈球形,粒径在2～3μm之间;复合材料对莱克多巴胺表现出良好的吸附性能,吸附过程50 min达到平衡,适合准二级动力学特征,属化学吸附,吸附等温线符合Freundlich模型;复合材料经过6次吸附解析,再生后对莱克多巴胺的吸附率仅有小幅下降,表明具有较好的循环再生吸附能力.     

A periodic DFT study on adsorption of small molecules(CH4,CO,H2O,H2S,NH3)on the WO3(001) surface-supported Au

Gas molecules(such as CH4,CO,H2O,H2S,NH_3)adsorption on the pure and Au-doped WO3(001)surface have been studied by Density functional theory calculations with generalized gradient approximation.Based on the the calculation of adsorption energy,we found the most stable adsorption site for gas molecules by comparing the adsorption energies of different gas molecules on the WO3(001)surface.We have also compared the adsorption energy of five different gas molecules on the WO3(001)surface,our calculation results show that when the five kinds of gases are adsorbed on the pure WO3(001)surface,the order of the surface adsorption energy is CO>H2S>CH4>H2O>NH3.And the results show that NH3 is the most easily adsorbed gas among the other four gases adsorbed on the surface of pure WO3(001)surface.We also calculated the five different gases on the Au-doped WO3(001)surface.The order of adsorption energy was found to be different from the previous calculation:CO>CH4>H2S>H2O>NH3.These results provide a new route for the potential applications of Au-doped WO3 in gas molecules adsorption.